H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration
5-16
To do... Use the command... Remarks
Enable route refresh
peer { ipv6-group-name |
ipv6-address } capability-advertise
route-refresh
Optional
Enabled by
default
II. Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
Required
Enter IPv6 address family
view
ipv6-family —
Save all routes from a
peer/peer group, not
letting them go through
the inbound policy
peer { ipv6-group-name |
ipv6-address } keep-all-routes
Optional
Not saved by
default.
Return to user view
return
Soft-reset BGP
connections manually
refresh bgp ipv6 { all | ipv6-address
| group ipv6-group-name | external
| internal } { export | import }
Required
 Note:
If the peer keep-all-routes command is used, all routes from the peer/peer group will
be saved regardless of whether the filtering policy is available. These routes will be
used to generate IPv6 BGP routes after soft-reset is performed.
5.6.4 Configuring the Maximum Number of Load-Balanced Routes
Follow these steps to configure the maximum number of load balanced routes:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
Required
Enter IPv6 address family
view
ipv6-family —