H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 3 Logging in Through Telnet
3-13
To do… Use the command… Remarks
Set the timeout time for
the user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if no
operation is performed in the
user interface within 10
minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Note that if you configure to authenticate the users in the scheme mode, the command
level available to users logging into a switch depends on the authentication-mode
scheme [ command-authorization ] command, the user privilege level level
command, and the service-type { ftp [ ftp-directory directory ] | lan-access | { ssh |
telnet | terminal }* [ level level ] } command, as listed in
Table 3-6.