H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration
1-28
bytes=56 Sequence=5 hop limit=255 time = 60 ms
--- 3001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 50/60/70 ms
1.11 Troubleshooting IPv6 Basics Configuration
I. Symptom
The peer IPv6 address cannot be pinged.
II. Solution
z Use the display current-configuration command in any view or the display this
command in system view to check that the IPv6 packet forwarding function is
enabled.
z Use the display ipv6 interface command in any view to check that the IPv6
address of the interface is correct and that the interface is up.
z Use the debugging ipv6 packet command in user view to enable the debugging
for IPv6 packets and make judgment according to the debugging information.