H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 2 Dual Stack Configuration
2-2
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the IPv6 packet forwarding
function
ipv6
Required
Disabled by
default.
Enter interface view
interface
interface-type
interface-number
—
Configure an IPv4 address for the
interface
ip address ip-address
{ mask | mask-length }
[ sub ]
Required
By default, no
IP address is
configured.
Manually
specify an
IPv6 address
ipv6 address
{ ipv6-address
prefix-length |
ipv6-address/prefix-le
ngth }
Configure
IPv6
global
unicast
address or
local
address
Configure an
IPv6 address
in the EUI-64
format
ipv6 address
ipv6-address/prefix-le
ngth eui-64
Use either
command.
By default, no
local address
or global
unicast
address is
configured on
an interface
Automatically
create an
IPv6 link-local
address
ipv6 address auto
link-local
Configure
an IPv6
address
on the
interface
Configure
IPv6
link-local
address
Manually
specify an
IPv6 link-local
address
ipv6 address
ipv6-address
link-local
Optional
By default,
after you
configured an
IPv6 local
address or
global unicast
address, a link
local address
is
automatically
created.