H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 4 Logging In Using Modem
4-5
Figure 4-3 Call the modem
Step 5: Provide the password when prompted. If the password is correct, the prompt
(such as <H3C>) appears. You can then configure or manage the switch. You can also
enter the character ? at anytime for help. Refer to the following chapters for information
about the configuration commands.
 Note:
If you perform no AUX user-related configuration on the switch, the commands of level
3 are available to modem users.
4.5 Modem Attribute Configuration
You can configure the attributes of the modem directly connected to the console port of
your switch. This modem is called the switch-side modem.
4.5.1 Configuration Prerequisites
z The authentication mode for login users has been configured on the AUX user
interface.
z The modem dialup configuration environment is ready.
4.5.2 Configuration Procedure
Follow these steps to configure the switch-side modem: