H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 2 IGMP Snooping Configuration
2-28
# Create VLAN 100, assign Ethernet 2/0/1 through Ethernet 2/0/3 to this VLAN, and
enable IGMP Snooping in the VLAN.
[SwitchA] vlan 100
[SwitchA-vlan100] port ethernet 2/0/1 to ethernet 2/0/3
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] quit
# Configure Ethernet 2/0/3 to be a static router port.
[SwitchA] interface ethernet 2/0/3
[SwitchA-Ethernet2/0/3] igmp-snooping static-router-port vlan 100
[SwitchA-Ethernet2/0/3] quit
4) Configure Switch B
# Enable IGMP Snooping globally.
<SwitchB> system-view
[SwitchB] igmp-snooping
[SwitchB-igmp-snooping] quit
# Create VLAN 100, assign Ethernet 2/0/1 and Ethernet 2/0/2 to this VLAN, and enable
IGMP Snooping in the VLAN.
[SwitchB] vlan 100
[SwitchB-vlan100] port ethernet 2/0/1 ethernet 2/0/2
[SwitchB-vlan100] igmp-snooping enable
[SwitchB-vlan100] quit
5) Configure Switch C
# Enable IGMP Snooping globally.
<SwitchC> system-view
[SwitchC] igmp-snooping
[SwitchC-igmp-snooping] quit
# Create VLAN 100, assign Ethernet 2/0/1 through Ethernet 2/0/5 to this VLAN, and
enable IGMP Snooping in the VLAN.
[SwitchC] vlan 100
[SwitchC-vlan100] port ethernet 2/0/1 to ethernet 2/0/5
[SwitchC-vlan100] igmp-snooping enable
[SwitchC-vlan100] quit
6) Verify the configuration
# View the detailed information about IGMP Snooping multicast groups in VLAN 100 on
Switch A.
[SwitchA] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).