H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches Chapter 5 Logging in Through NMS
5-1
Chapter 5 Logging in Through NMS
When logging in through NMS, go to these sections for information you are interested
in:
z Introduction
z Connection Establishment Using NMS
5.1 Introduction
You can also log into a switch through an NMS (network management station), and
then configure and manage the switch through the agent module on the switch.
z The agent here refers to the software running on network devices (switches) and
as the server.
z SNMP (simple network management protocol) is applied between the NMS and
the agent.
To log into a switch through an NMS, you need to perform related configuration on both
the NMS and the switch.
Table 5-1 Requirements for logging into a switch through an NMS
Item Requirement
The IP address of the management VLAN of the switch is
configured. The route between the NMS and the switch is
available. (Refer to IP Addressing and Performance and IP
Routing-GR for more.)
Switch
The basic SNMP functions are configured. (Refer to the
SNMP-RMON module for more.)
NMS
The NMS is properly configured. (Refer to the user manual of
your NMS for more.)