H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 5 PIM Configuration
5-39
To do... Use the command... Remarks
View the information
about unacknowledged
graft messages
display pim grafts
Available in any
view
View the PIM information
on an interface or all
interfaces
display pim interface
[ interface-type interface-number ]
[ verbose ]
Available in any
view
View the information of
join/prune messages to
send
display pim join-prune mode
{ sm [ flags flag-value ] | ssm }
[ interface interface-type
interface-number | neighbor
neighbor-address ] * [ verbose ]
Available in any
view
View PIM neighboring
information
display pim neighbor [ interface
interface-type interface-number |
neighbor-address | verbose ] *
Available in any
view
View the content of the
PIM routing table
display pim routing-table
[ group-address [ mask
{ mask-length | mask } ] |
source-address [ mask
{ mask-length | mask } ] |
incoming-interface
[ interface-type interface-number |
register ] | outgoing-interface
{ include | exclude | match }
{ interface-type interface-number |
register } | mode mode-type | flags
flag-value | fsm ] *
Available in any
view
View the RP information
display pim rp-info
[ group-address ]
Available in any
view
Reset PIM control
message counters
reset pim control-message
counters [ interface interface-type
interface-number ]
Available in user
view
5.7 PIM Configuration Examples
5.7.1 PIM-DM Configuration Example
I. Network requirements
z Receivers receive VOD information through multicast. The receiver groups of
different organizations form stub networks, and one or more receiver hosts exist in
each stub network. The entire PIM domain operates in the dense mode.
z Host A and Host C are multicast receivers in two stub networks.
z Switch D connects to the network that comprises the multicast source (Source)
through VLAN-interface 300.