H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 6 MSDP Configuration
6-27
[SwitchE] display msdp brief
MSDP Peer Brief Information
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.3.1 Up 00:16:40 ? 13 0
6.7.3 Anycast RP Configuration
I. Network requirements
z The PIM-SM domain has multiple multicast sources and receivers. OSPF runs
within the domain to provide unicast routes.
z It is required to configure the anycast RP application so that the receiver-side DRs
and the source-side DRs can initiate a Join message to their respective RPs that
are the topologically nearest to them.
z On Switch B and Switch D, configure the interface Loopback 10 as a C-BSR, and
Loopback 20 as a C-RP.
z The router ID of Switch B is 1.1.1.1, while the router ID of Switch D is 2.2.2.2. Set
up an MSDP peering relationship between Switch B and Switch D.