H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration
1-14
1.3.2 Creating an ISP Domain
For the NAS, each accessing user belongs to an ISP domain. Up to 16 ISP domains
can be configured on a NAS. If a user does not provide the ISP domain name, the
system considers that the user belongs to the default ISP domain.
Follow these steps to create an ISP domain:
To do… Use the command… Remarks
Enter system view
system-view
—
Create an ISP domain
and enter ISP domain
view
domain isp-name
Required
Return to system view
quit
—
Specify the default ISP
domain
domain default { disable
| enable isp-name }
Optional
The system-default ISP
domain named system by
default
 Note:
z You cannot delete the default ISP domain unless you change it to a non-default ISP
domain (with the domain default disable command) first.
z If a user enters a username without an ISP domain name, the device uses the
authentication scheme for the default ISP domain to authenticate the user.
1.3.3 Configuring ISP Domain Attributes
Follow these steps to configure ISP domain attributes:
To do… Use the command… Remarks
Enter system view
system-view
—
Create an ISP domain
and enter ISP domain
view
domain isp-name
Required
Place the ISP domain to
the state of active or
blocked
state { active | block }
Optional
When created, an ISP is
in the state of active by
default, and users in the
domain can request
network services.