H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration
1-29
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the RADIUS trap
function
radius trap
{ accounting-server-do
wn |
authentication-server-d
own }
Optional
Disabled by default
Create a RADIUS scheme
and enter RADIUS
scheme view
radius scheme
radius-scheme-name
Required
Not defined by default
Specify the format of the
username to be sent to a
RADIUS server
user-name-format
{ with-domain |
without-domain }
Optional
By default, the ISP
domain name is included
in the username.
Specify the unit for data
flows or packets to be
sent to a RADIUS server
data-flow-format { data
{ byte | giga-byte |
kilo-byte | mega-byte } |
packet { giga-packet |
kilo-packet |
mega-packet |
one-packet } }*
Optional
The defaults are as
follows:
byte for data flows, and
one-packet for data
packets.
In RADIUS
scheme
view
nas-ip ip-address
quit
Set the
source IP
address of
the device
to send
RADIUS
packets
In system
view
radius nas-ip ip-address
Use either command
By default, the outbound
port serves as the source
IP address to send
RADIUS packets