H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 1 VLAN Configuration
1-14
To do… Use the command… Remarks
Configure the association
between the Hybrid port
and the IP-subnet-based
VLAN
port hybrid
ip-subnet-vlan vlan
vlan-id
Required
1.7 Displaying and Maintaining VLAN
To do... Use the command… Remarks
Display the information
about specific VLANs
display vlan [ vlan-id1 [ to
vlan-id2 ] | all | dynamic |
reserved | static ]
Available in any view
Display the information
about a VLAN interface
display interface
Vlan-interface
[ vlan-interface-id ]
Available in any view
Display the protocol
information and protocol
indexes of specified
VLANs
display protocol-vlan vlan
{ vlan-id [ to vlan-id ] | all }
Available in any view
Display protocol based
VLAN information on
specified ports
display protocol-vlan
interface { interface-type
interface-number [ to
interface-type
interface-number ] | all }
Available in any view
Display the
IP-subnet-based VLAN
information and IP subnet
indexes of specified
VLANs
display ip-subnet-vlan vlan
{ vlan-id [ to vlan-id ] | all }
Available in any view
Display the
IP-subnet-based VLAN
information and IP subnet
index of specified ports
display ip-subnet-vlan
interface { interface-type
interface-number [ to
interface-type
interface-number | all }
Available in any view
Clear the statistics on a
VLAN interface
reset counters interface
Vlan-interface
[ vlan-interface-id ]
Available in user view
1.8 VLAN Configuration Example
I. Network requirements
z Device A connects to Device B through the Trunk port Ethernet 2/0/1;
z The default VLAN ID of the port is 100;