H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 2 Isolate-User-VLAN Configuration
2-2
2.2 Configuring Isolate-User-VLAN
Configure the isolate-user-vlan through the following steps:
1) Configure the isolate-user-vlan;
2) Configure the secondary VLAN
3) Add ports to the isolate-user-vlan ( note that no port can be a Trunk port) and
ensure that at least one port has the isolate-user-vlan as its default VLAN;
4) Add ports to the secondary VLAN ( note that no port can be a Trunk port) and
ensure that at least one port has the secondary VLAN as its default VLAN;
5) Configure the mapping between the isolate-user-vlan and the secondary VLAN.
Follow these steps to configure an isolate-user-VLAN:
To do... Use the command Remarks
Enter system view
system-view
—
Create a VLAN (or enter VLAN
view)
vlan vlan-id —
Configure the VLAN as an
isolate-user-VLAN
isolate-user-vlan
enable
Required
Quit to system view
quit
—
Access port
Refer to
Configuring an
Access-Port-Based
VLAN
Add ports to the
isolate-user-VLAN
and ensure that at
least one port has
the
isolate-user-VLAN
as its default VLAN
Hybrid port
Refer to
Configuring a
Hybrid-Port-Based
VLAN
Either is required.
Quit to system view
quit
—
Create secondary VLANs
vlan { vlan-id1 [to
vlan-id2 ] | all }
Required
Access port
Refer to
Configuring an
Access-Port-Based
VLAN
Add ports to the
secondary VLAN
and ensure that at
least one port has
the secondary VLAN
as its default VLAN
Hybrid port
Refer to
Configuring a
Hybrid-Port-Based
VLAN
Required to
choose either
Quit to system view
quit
—
Configure the mapping between
the isolate-user-VLAN and the
secondary VLANs
isolate-user-vlan
isolate-user-vlan-id
secondary
secondary-vlan-list
Required