H3C S7500E Series Ethernet Switches Operation Manual

Operation Manual – ACL
H3C S7500E Series Ethernet Switches Chapter 2 IPv4 ACL Configuration
2-10
2.7.2 Network Diagram
Eth2/0/4Eth2/0/1
Eth2/0/2 Eth2/0/3
192.168.4.1
Switch
R&D department
Marketing department
Salary query server
President`s office
192.168.2.0/24
192.168.3.0/24
192.168.1.0/24
Figure 2-1 Network diagram for IPv4 ACL configuration
2.7.3 Configuration Procedure
1) Create a time range for office hours
# Create a periodic time range spanning 8:00 to 18:00 in working days.
<Switch> system-view
[Switch] time-range trname 8:00 to 18:00 working-day
2) Define an ACL to control access to the salary query server
# Configure a rule to control access of the R&D Department to the salary query server.
[Switch] acl number 3000
[Switch-acl-adv-3000] rule deny ip source 192.168.2.0 0.0.0.255 destination
192.168.4.1 0.0.0.0 time-range trname
[Switch-acl-adv-3000] quit
# Configure a rule to control access of the Marketing Department to the salary query
server.
[Switch] acl number 3001
[Switch-acl-adv-3001] rule deny ip source 192.168.3.0 0.0.0.255 destination
192.168.4.1 0.0.0.0 time-range trname
[Switch-acl-adv-3001] quit
3) Apply the IPv4 ACL
# Configure class c_rd for packets matching IPv4 ACL 3000.
[Switch] traffic classifier c_rd
[Switch-classifier-c_rd] if-match acl 3000
[Switch-classifier-c_rd] quit