H3C S7502 Ethernet Switch Installation Manual

Installation Manual
H3C S7502 Ethernet Switch Chapter 7 Software Maintenance
7-15
The current application file is :SWITCH000.app
The backup application file is : SWITCH100.app
Free Space : 471040 bytes
The system shows all the files in the Flash, wherein the one with an asterisk (*) is the
primary file and the one with a hyphen (-) is the backup file.
Step 3: Re-configure the primary and backup files.
z Set the primary file.
Enter the serial number of the desired primary file when the terminal shows the
following information:
Please input the primary application file number to boot :9
Press <Enter>. The terminal displays the primary file name you have chosen. Type <Y>
to acknowledge or <N> to reset.
The primary file you selected is SWITCH100.app, are you sure? Yes or No(Y/N):Y
If you type <Y>, the terminal displays the following information:
On reboot, SWITCH100.app will become the default primary application file to
boot!
This means the primary file has been set successfully.
z Set the backup file.
You can set the backup file in a similar way you set the primary file. The terminal
displays the following information:
Please input the backup application file number :7
The file you selected is SWITCH200.app, are you sure? Yes or No(Y/N)y
On reboot,SWITCH200.app will become the backup application file to boot!
Step 3: Decide whether to run the primary file immediately. If you type <Y> and press
<Enter>, the system begins to reboot.
Do you want to run SWITCH100.app now?Yes or No(Y/N)?Y
press Ctrl+B to enter Boot Menu... 5
Auto-booting....................
One of the following cases may occur when the system is restarted:
z The primary file is correct and the system boots with the primary file.
z An error occurs when the system boots with the primary file, so it boots with the
backup file.
z An error occurs to both the primary and backup files, so the system chooses
randomly an application file for booting.
z The system stops choosing the boot file if it fails when booting with a random
application file. Then it supposes that the file system is unavailable or no correct
booting file is available.