Manualshelf

HP 10500 Switch Series - HP 10500-CMW710-R2105-B Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
31323334353637383940
22
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4):
8. Enter 0 in the Ethernet submenu to return to the EXTEND-BOOTWARE menu.
9. Enter 1 in the EXTEND-BOOTWARE menu to run the new Comware software.
Using Xmodem to upgrade through the console port
1. Connect the console port of the switch to the PC that stores the .ipe file.
2. Run the terminal emulation program on the PC.
3. Start the switch and access the EXTEND-BOOTWARE menu (see "Using BootWare menus").
4. Enter 2 in the EXTEND-BOOTWARE menu to access the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
5. Enter 4 in the serial submenu to change the baud rate of the console port.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):2
6. Enter an appropriate baud rate option. For example, enter 2 to select 19200 bps.
Baudrate has been changed to 19200 bps.
Please change the terminal's baudrate to 19200 bps, press ENTER when ready.
NOTE:
If you select 9600 bps, directly go to Step 11.