HP 10500 Switch Series - HP 10500-CMW710-R2105-B Release Notes

............................................................................

...................................................Done.

Loading file flash:/10500-CMW710-BOOT-A0035P16.bin.........................

............................................................................

...........................................Done.

Image file flash:/10500-CMW710-BOOT-A0035P16.bin is self-decompressing.....

............................................................................

...............Done.

System image is starting...

Waiting for StackBoard to insert, this process may occupy time up to 300 seconds

STM Init Start.

User interface aux1/1 is available.

Press ENTER to get started.

Upgrading Comware software through the console port

You can upgrade the Comware software through the console port or modify the baud rate of the console

port from the Serial submenu.

To upgrade Comware software through the console port from the Serial submenu:

1. Enter 2 in the EXTEND-BOOTWARE menu to access the Serial submenu.

Enter your choice(0-9): 2

===========================<Enter Serial SubMenu>===========================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Modify Serial Interface Parameter |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4):

Table 16 Serial submenu options

Option

Tasks

<1> Download Image Program To

SDRAM And Run

Load and run a Comware software image in SDRAM.

If password recovery capability is disabled, this option is not

available.

<2> Update Main Image File

Download a Comware software image to the current storage medium

as the main image (the file attribute is set to M).

If a main system image already exists, the M file attribute of the

original image is removed.