HP 10500 Switch Series - HP 10500-CMW710-R2105-B Release Notes

2
CAUTION:
To avoid an upgrade failure, use Table 3 to verify the hardware and software compatibility before
performing an upgrade.
Table 3 Hardware and software compatibility matrix
Item
Specifications
Product family
10500 series
Hardware platform
HP 10504/10508/10508-V/10512
H3C S10504/S10508/S10508-V/S10512
Minimum memory requirements
MPU 8G/LPU 1G/NPU 1G
Minimum Flash requirements
500M
BootWare image
Shipped with the switch.
(Use the display version command in any view to view the BootWare
version. See Note
②
)
System software image
10500-CMW710-R2105.ipe
IMC version
iMC MVM 5.2 (E0401H01)
iMC NTA 5.2 (E0401P02)
iMC PLAT 5.2 (E0401H03)
iMC QoSM 5.2 (E0401)
iMC TAM 5.2 (E0401)
iMC UAM 5.2 (E0402)
iMC UBA 5.2 (E0401P02)
iNode version
iNode PC 5.1 (E0402) and later
SecBlade FW Enhance
SECBLADEIII-CMW520-R3816 and later
Display the system software and BootWare version information:
<10508>dis version
HP Comware Platform Software
<S10508>dis version
HP Comware Software, Version 7.1.035, Release 2105 ------Note①
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP S10508-V uptime is 0 weeks, 0 days, 1 hour, 58 minutes
LPU 0:
Uptime is 0 weeks,0 days,1 hour,56 minutes
HP S10508-V LPU with 1 XLS408 Processor
BOARD TYPE: LSU1TGS48SF0
DRAM: 1024M bytes
FLASH: 0M bytes
NVRAM: 0K bytes
PCB 1 Version: VER.A
Bootrom Version: 511 ------Note②
CPLD 1 Version: 002