HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

2. Upgrade Comware software

The following example uses newest.ipe to upgrade Comware software.

# Decompress the file newest.ipe on the active MPU (in slot 0).

<HP>install add flash:/newest.ipe flash:

Verifying image file...Done.

This operation will take several minutes, please wait...........................

....................................................Done.

In this example, the decompressed image files include a boot image

10500-CMW710-BOOT-E2102.bin and a system image 10500-CMW710-SYSTEM-E2102.bin.

# Specify the images as the main startup software images for the active MPU.

<Sysname> boot-loader file boot flash:/10500-CMW710-BOOT-E2102.bin system

flash:/10500-CMW710-SYSTEM-E2102.bin slot 0 main

This command will set the main startup software images. Continue? [Y/N]:y

The images that have passed all examinations will be used as the main startup software

images at the next reboot on slot 0

# Specify the images as the main startup software images for the standby MPU.

<Sysname> boot-loader file boot flash:/10500-CMW710-BOOT-E2102.bin system

flash:/10500-CMW710-SYSTEM-E2102.bin slot 1 main

This command will set the main startup software images. Continue? [Y/N]:y

Successfully copied flash:/ 10500-CMW710-BOOT-E2102.bin to slot1#flash:/

10500-CMW710-BOOT-E2102.bin.

Successfully copied flash:/ 10500-CMW710-SYSTEM-E2102.bin to slot1#flash:/

10500-CMW710-SYSTEM-E2102.bin.

The images that have passed all examinations will be used as the main startup software

images at the next reboot on slot 1

For more information about the boot-loader command, see HP 10500 Switch Series Fundamentals

Command Reference.

# To prevent configuration loss at reboot, save the running configuration.

<Sysname> save

# Reboot the switch to complete the upgrade.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

3. Install a patch package

# Uninstall the old patch package from all cards on the switch.

<Sysname> display install active

Active packages on slot 0:

flash:/10500-CMW710-BOOT-E2102.bin

flash:/10500-CMW710-SYSTEM-E2102.bin

flash:/10500-CMW710-SYSTEM-E2102H00.bin

Active packages on slot 1:

flash:/10500-CMW710-BOOT-E2102.bin

flash:/10500-CMW710-SYSTEM-E2102.bin