HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

15
Now updating the Boot ROM, please wait........... ...........Done.
# Upgrade the BootWare of the switching fabric module in slot 6 of member device 2. (Upgrade
other switching fabric modules in the same way.)
<Sysname>bootrom update file flash:/new.bin chassis 2 slot 6
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating the Boot ROM, please wait........... ...........Done.
# Reboot the IRF fabric to complete the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
2. Upgrade Comware software
The following example uses newest.ipe to upgrade Comware software.
# Decompress the file newest.ipe on the global active MPU (in slot 0).
<HP>install add flash:/newest.ipe flash:
Verifying image file...Done.
This operation will take several minutes, please wait...........................
....................................................Done.
In this example, the decompressed images files include a boot image
10500-CMW710-BOOT-E2102.bin and a system image 10500-CMW710-SYSTEM-E2102.bin.
# Specify the images as the main startup software images for the global active MPU.
<Sysname> boot-loader file boot flash:/10500-CMW710-BOOT-E2102.bin system
flash:/10500-CMW710-SYSTEM-E2102.bin chassis 1 slot 0 main
The images that have passed all examinations will be used as the main startup software
images at the next reboot on chassis 1 slot 0..
# Specify the images as the main startup software images for the standby MPUs:
 On the standby MPU in slot 1 of member device 1:
<Sysname> boot-loader file boot flash:/10500-CMW710-BOOT-E2102.bin system
flash:/10500-CMW710-SYSTEM-E2102.bin chassis 1 slot 1 main
This command will set the main startup software images. Continue? [Y/N]:y
Successfully copied flash:/ 10500-CMW710-BOOT-E2102.bin to chassis1#slot1#flash:
/ 10500-CMW710-BOOT-E2102.bin.
Successfully copied flash:/ 10500-CMW710-SYSTEM-E2102.bin to chassis1#slot1#flas
h:/ 10500-CMW710-SYSTEM-E2102.bin.
The images that have passed all examinations will be used as the main startup
software images at the next reboot on chassis 1 slot 1.
 On the standby MPU in slot 0 of member device 2:
<Sysname> boot-loader file boot flash:/10500-CMW710-BOOT-E2102.bin system
flash:/10500-CMW710-SYSTEM-E2102.bin chassis 2 slot 0 main
This command will set the main startup software images. Continue? [Y/N]:y
Successfully copied flash:/ 10500-CMW710-BOOT-E2102.bin to chassis1#slot1#flash:
/ 10500-CMW710-BOOT-E2102.bin.
Successfully copied flash:/ 10500-CMW710-SYSTEM-E2102.bin to chassis1#slot1#flas
h:/ 10500-CMW710-SYSTEM-E2102.bin.
The images that have passed all examinations will be used as the main startup
software images at the next reboot on chassis 2 slot 0.