HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

34
447616 bytes downloaded!
Updating Basic BootWare? [Y/N]
16. Enter Y to upgrade the basic BootWare.
Updating Basic BootWare.........Done!
Updating Extend BootWare? [Y/N]
17. Enter Y to upgrade the extended BootWare.
Updating Extend BootWare.........Done!
====================<BOOTWARE OPERATION SERIAL SUB -MENU>====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
18. Enter 0 to return to the BootWare Operation menu.
19. Enter 0 in the BootWare Operation menu to return to the EXTEND-BOOTWARE menu.
20. Enter 0 in the EXTEND-BOOTWARE menu to reboot the switch.
21. Change the baud rate of the HyperTerminal back to 9600 bps, and reconnect to the switch.