HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

54
==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):
Table 21 DEVICE CONTROL menu options
Option
Task
<1> Display All Available Nonvolatile Storage Device(s)
Display all available storage media.
<2> Set The Operating Device
Set the current storage medium. All file
operations performed using BootWare menus
are performed on the current storage medium.
<3> Set The Default Boot Device
Set the default storage medium from which the
system will start up.
<0> Exit To Main Menu
Return to the EXTEND-BOOTWARE menu.
Using the EXTEND-ASSISTANT menu
In the EXTEND-BOOTWARE menu, press Ctrl+Z to access the EXTEND-ASSISTANT menu.
==========================<EXTEND-ASSISTANT MENU>===========================
|<1> Display Memory |
|<2> Search Memory |
|<0> Exit To Main Menu |
================================================== ==========================
Enter your choice(0-2):
Formatting the file system
CAUTION:
Formatting the file system of a storage medium can cause the loss of all files.
To format the file system of the current storage medium:
1. Press Ctrl + F while you are in the EXTEND-BOOTWARE menu.
2. Enter Y when the prompt for confirmation appears.
Warning:All files on flash will be lost! Are you sure to format? [Y/N] y
Handling upgrade failures
If an upgrade failure occurs, the switch operates using the original version.
To handle upgrade failure:
3. Check that physical ports are correctly connected.
4. Check that the HyperTerminal settings are correct.