HP 11900 Switch Series - HP 11900-CMW710-R2105 Release Notes

52
Table 20 BootWare Operation menu options
Option
Tasks
<1> Backup Full BootWare
Back up the entire BootWare image. When the BootWare
image is corrupted, you could use the backup image for
recovery.
<2> Restore Full BootWare
Recover the entire BootWare image.
If the BootWare image has been corrupted, you can use a
backup BootWare image to recover it.
<3> Update BootWare By Serial
Update the BootWare from the console port.
<4> Update BootWare By Ethernet
Update the BootWare from an Ethernet port.
<0> Exit To Main Menu
Return to the EXTEND-BOOTWARE menu.
Skipping console login authentication
IMPORTANT:
 To perform this task, make sure password recovery capability is enabled. If the capability is disabled,
you cannot perform this task.
 Skipping console login authentication applies only to console login users.
 Skipping console login authentication is a one-time operation. It takes effective only for the first system
boot or reboot (option 1 and option 0 in the EXTEND-BOOTWARE menu) after you perform the
operation. If you do not configure a new login password, the original setting continues to take effect for
the subsequent reboot.
If you cannot remember the console login password, enter 8 in the EXTEND-BOOTWARE menu so you
can log in to the device through the console port without login authentication.
Enter your choice(0-9): 8
Clear Image Password Success!
Managing storage media
To get information about available storage media, and set the storage medium you want to use for file
operations, enter 9 in the EXTEND-BOOTWARE menu.
Enter your choice(0-9): 9
The following DEVICE CONTROL menu appears:
==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):