HP 12500 Switch Series - 12500-CMW710-R7128 Release Notes

7
List of resolved problems
Resolved problems in 12500-CMW710-R7128
LPD044981
Symptom: On an EVI edge device, half of ports on a card in a non-Admin MDC fail to forward
site-to-site unicast traffic.
Condition:
The switch is an EVI edge device.
The allocate interface command is executed twice to assign ports on a card to a non-Admin
MDC. The first time it is executed ports in the first half of the port range are assigned. The
second time it is executed ports in the second half of the port range are assigned.
LPD046752
Symptom: If too many static routes in different VPNs use the same outgoing interface, routing table
entry insufficiency might occur.
Condition: Static routes in different VPNs use the same outgoing interface.
LPD049405
Symptom: Device login password can be obtained by accessing the hh3cUserPassword node of
hh3cUserInfoTable with SNMP.
Condition: The hh3cUserPassword node of hh3cUserInfoTable is accessed with SNMP.
Resolved problems in 12500-CMW710-R7125
None.
Related documentation
Documentation set
HP 12500 Routing Switch Series Installation Guide
HP 12500 Routing Switch Series Configuration Guides
HP 12500 Routing Switch Series Command References
Obtaining documentation
To find related documents, browse to the Manuals page of the HP Business Support Center website:
http://www.hp.com/support/manuals