HP 12500 Switch Series - 12500-CMW710-R7129 Release Notes

14
upgraded from 1 GB to 4 GB of SDRAM by using two memory upgrade kits (2 x JC609A). If required,
1 GB CF cards (JC684A) are available for purchase. If an upgraded JC072A needs to be returned for
repair, be sure to retain the upgrade parts for use in the replacement unit.
Due to physical memory limits, interface cards with 512 MB memory do not support ISSU, and the
interfaces on each of these interface cards can be assigned to only one MDC. Except for these ISSU
and MDC limitations, these cards provide full support for all other features. The following table
shows details:
Table 7 Support of Ethernet interface cards for ISSU and MDC
HP
code
Description
ISSU
MDC
JC075A
HP 48-Port GbE SFP LEB 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC069A
HP 48-Port GbE SFP 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC074A
HP 48-Port Gig-T Module LEB 12500 Mod
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC065A
HP 48-Port Gig-T 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC076A
HP 4-Port 10GBASE-R/W LEB 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC070A
HP 4-Port 10-GbE XFP 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC
JC073A
HP 8-Port 10GBASE-R/W LEB 12500 Module
Not Supported
Supported with
limitation: The interfaces
on one card can be
assigned to only one
MDC