HP 12500 Switch Series - 12500-CMW710-R7129 Release Notes

227 Entering Passive Mode (192,168,1,1,8,238)

150 "D:\test\update.ipe" file ready to send (98780160 bytes) in IMAGE / Binary mode

226 Transfer finished successfully.

98780160 bytes received in 44.44 seconds (2.12 Mbyte/s)

ftp>

2. Use the quit command in FTP client view to return to user view.

ftp>quit

221 Service closing control connection

3. Use the boot-loader command in user view to load the upgrade file update.ipe and specify

the file as the main startup image file.

<Sysname>boot-loader file cfa0:/update.ipe slot 0 main

Images in IPE:

update-boot.bin

update-system.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to target slot.

The specified file list will be used as the main startup software images at the

next reboot on slot 0.

4. Use the display boot-loader command in user view to verify that the images in the .ipe file

have been loaded.

<Sysname> display boot-loader

Software images on slot 0:

Current software images:

cfa0:/main-boot.bin

cfa0:/main-system.bin

Main startup software images:

cfa0:/update-boot.bin

cfa0:/update-system.bin

Backup startup software images:

None

5. Use the reboot command in user view to reboot the switch.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait..

.......DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

%Sep 16 07:53:35:583 2012 HP DEV/5/SYSTEM_REBOOT: -MDC=1; System is rebooting no

DDR2 SDRAM test successful.

6. After the reboot is complete, perform the display version command to verify that the system

software image is correct.