HP 12500 Switch Series - 12500-CMW710-R7129 Release Notes

30
3. Enter 0 to return to the BootWare menu, and then enter 1 to reboot the system.
Using XMODEM to upgrade software through the console
port
XMODEM download through the console port is slower than TFTP or FTP download through an
Ethernet port. To save time, use TFTP or FTP as long as possible.
1. Enter 2 in the BootWare menu to access the serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Update User Private File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
2. Enter 6 in the serial submenu to modify the baudrate.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):5
If you enter 5 to select 115200 bps, the following information appears:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
NOTE:
If you use the default baudrate (9600 bps), go to Step 7.
3. Select Call > Disconnect in the HyperTerminal window to disconnect the terminal from the
switch.