HP 12500 Switch Series - 12500-CMW710-R7129 Release Notes

32
Figure 4 Modifying the baud rate
6. Select Call > Call to reestablish the connection.
Figure 5 Reestablishing the connection
7. Press Enter. The following information appears:
The current baudrate is 115200 bps
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default) |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200* |
|<0> Exit |
============================================================================
Enter your choice(0-5):
8. Enter 0 to return to the serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |