HP 12500 Switch Series - 12500-CMW710-R7129 Release Notes

35
2. If you are using the console port for file transfer, check the HyperTerminal settings (including
the baud rate and data bits) for any wrong setting.
3. Check the file transfer settings:
 If XMODEM is used, you must set the same baud rate for the terminal as for the console
port.
 If TFTP is used, you must enter the same server IP addresses, file name, and working
directory as set on the TFTP server.
 If FTP is used, you must enter the same FTP server IP address, source file name, working
directory, and FTP username and password as set on the FTP server.
4. Check the FTP or TFTP server for any incorrect setting.
5. Verify that the storage device has enough space for the upgrade file.
6. If the "Something is wrong with the file" message appears, verify that the file is usable.