HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes
HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 29
Bootrom update succeeded in slot 0.
# Upgrade the Boot ROM for the standby MPU in slot 1.
<Sysname> bootrom update file slot1#flash:/newest.app slot 1
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in slot 1.
# Upgrade the Boot ROM for the LPU in slot 3.
<Sysname> bootrom update file flash:/newest.app slot 3
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Board has finished loading file on Chassis 0 Slot 3.
Start accessing bootflash chip...
Bootrom update succeeded in slot 3.
# Upgrade the Boot ROM for the LPU in slot 4.
<Sysname> bootrom update file flash:/newest.app slot 4
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Board has finished loading file on Chassis 0 Slot 4.
Start accessing bootflash chip...
Bootrom update succeeded in slot 4.
# Reboot the switch to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
NOTE:
The Boot ROM image stored on the active MPU can be used to upgrade both the active MPU and LPUs,
while that stored on the standby MPU is used to upgrade the standby MPU only.
2. Upgrade system software
# Specify the file newest.app as the main system software image to be used at the next startup of the
active MPU.
<Sysname> boot-loader file flash:/newest.app slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
# Specify the file newest.app as the main system software image to be used at the next startup of the
standby MPU.
<Sysname> boot-loader file slot1#flash:/newest.app slot 1 main