HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 34
NOTE:
Make sure that the upgrade files exist in the root directory of the storage medium of the active and standby
MPUs of the IRF fabric.
Perform the following tasks as needed:
• Upgrade Boot ROM
• Upgrade system software
• Install patches
1. Upgrade Boot ROM
# Upgrade the Boot ROM program of the active MPU of the IRF fabric.
<Sysname> bootrom update file flash:/newest.app chassis 1 slot 0
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 0.
# Upgrade the Boot ROM program of each standby MPU of the IRF fabric.
• On the standby MPU in slot 1 of member device 1
<Sysname> bootrom update file chassis1#slot1#flash:/newest.app chassis 1 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 1.
• On the standby MPU in slot 0 of member device 2
<Sysname> bootrom update file chassis2#slot0#flash:/newest.app chassis 2 slot 0
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 0.
• On the standby MPU in slot 1 of member device 2
<Sysname> bootrom update file chassis2#slot1#flash:/newest.app chassis 2 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 1.
# Reboot the IRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y