HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 36
# Download the patch files to the root directory of the storage medium of the active and standby MPUs,
and then install the patch files with the patch install command.
<Sysname> system-view
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.
NOTE:
• A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 10
shows the default names of patch files.
• For more information about patch installation, see
Fundamentals in the HP 7500 Switch Series
Configuration Guides
.
Upgrade from the boot menu
You can upgrade the Boot ROM program and system software image for the MPUs from the boot menu.
• Upgrading Boot ROM from the boot menu
• Upgrading system software from the boot menu
CAUTION:
You cannot simultaneously upgrade the active and standby MPUs from the boot menu. To ensure that the
active and standby MPUs use the same software version, upgrade them in turn.
Boot menu
Connect a configuration terminal such as a PC to the console port of the switch with a console cable, run
the terminal emulation program on the PC, and power on the switch.
Upon power-on, the switch runs the Boot ROM program first and displays the following information:
Starting......
RAMLine.....OK
System is booting................
****************************************************************
* *
* BOOTROM, Version 3.01 *
* *
****************************************************************
Creation Date : Aug 9 2010
CPU Type : BCM1125H
CPU L1 Cache : 32KB
CPU Clock Speed : 600MHz