HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 42
NOTE:
If you want to use the baud rate of 9600 bps, select it and directly go to Step 7. In this case, the system
does not display the above information.
Step5 Disconnect HyperTerminal from the switch by clicking Disconnect in the HyperTerminal window.
Step6 Select File > Properties in the HyperTerminal window, click Configure in the popup dialog box, and
select the baud rate of 19200 bps in the console port properties dialog box.
Figure 1 The Switch Properties dialog box