HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 46
Step5
Answer Y to the question. The following information appears:
Load file from flash to sdram......done!
The file you selected is not the primary boot file, are you sure you want to
update from it? Yes or No(Y/N)Y
Step6 Answer Y to the question. The following information appears:
Will you Update Basic BootRom? (Y/N):
Step7 Answer Y to the question. The following information appears:
Updating Basic BootRom..........done!
Updating extended BootRom? (Y/N):
Step8 Answer Y to the question. The following information appears:
Updating extended BootRom...........done!
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):0
Step9 Type 0 to return to the boot menu.
BOOT MENU
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
Step10 Type 0 to reboot the switch.
NOTE:
The Boot ROM upgrade takes effect at the reboot.
Upgrading system software from the boot menu
Download new system software images
Download new system software images to your switch by using one of the following methods:
• Using TFTP through the management Ethernet port
• Using FTP through the management Ethernet port
• Using Xmodem through the console port