HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 48
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 0
Step7 Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup system software image.
For more information, see Set new main and backup system software images.
2. Using FTP through the management Ethernet port
Step8 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP
address of the PC is required), and connect the console port of the switch to the same or another PC.
Step9 Run the FTP server program on the PC connected to the management Ethernet port, specify the file
storage directory, and set the username and password.
Step10 Run the terminal emulation program on the PC connected to the console port. Start the switch, enter the
boot menu (see Boot menu for more information), and press 1 when you see "Enter your choice(0-5):"
to enter the download protocol menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
Step11 In the download protocol menu, type 2 to set the FTP parameters.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 2
Load File name :newest.app The name of the target .app file