Manualshelf

HP 7500 Switch Series - HP 7500-CMW520-R6701 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
41424344454647484950
HP 7500-CMW520-R6701 Release Notes
Hewlett-Packard Development Company, L.P. 49
Switch IP address :10.10.10.2 The IP address of the switch
Server IP address :10.10.10.3 The IP address of the PC that stores the .app file
FTP User Name :username The FTP username.
FTP User Password :12345 The password.
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.
Step12 Set the FTP parameters and press Enter. The following information appears:
Are you sure to download file to flash? Yes or No (Y/N):y
Step13 Answer Y to the question. The switch starts to download the file. When the download is complete, the
following information appears:
Loading........................................................................
...............................................................................
...............................................................................
.......................................................................done!
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):0
Step14 Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup system software image.
For more information, see Set new main and backup system software images.
3. Using Xmodem through the console port
Step15 Connect the console port of the switch to the PC that stores the target .app file.
Step16 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Boot menu for
more information), and type 1 when you see "Enter your choice(0-5):" to enter the download protocol
menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password