HP 7500 Switch Series - HP A7500-CMW520-R6626P02 Release Notes

HP A7500-CMW520-R6626P02 Release Notes
Hewlett-Packard Development Company, L.P.
26
CAUTION:
 To prevent configuration loss, save the latest configuration changes before you reboot the switch.
 System software images must be saved in the root directory of the storage medium. You can copy or
move system software images to the root directory. For more information about the boot-loader
command, see Fundamentals Command Reference in the HP A7500 Switch Series Command
References .
3. Install patches
# Download the patch files to the root directory of the storage medium of the active MPU and that of the
standby MPU, and then install the patch files with the patch install command.
<Sysname> system-view
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.
NOTE:
 A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 10
shows the default names of patch files.
 For more information about patch installation, see the Fundamentals Configuration Guide in the HP
A7500 Switch Series Configuration Guides .
Table 10 Patch files for different types of cards
Card type
Default patch file name
MPU
patch_mpu.bin
LPU
patch_lpu.bin
Auxiliary CPU on a LPU
patch_lpo.bin
Upgrading an IRF fabric
Upgrade prerequisites
# Telnet to the switch or log in through the console port.
# Display device information.
<Sysname> display device
Chassis Slot Type State Subslot Soft Ver Patch Ver
1 0 LSQ1SRP1CB Master 0 A7500 None
1 1 LSQ1SRP1CB Slave 0 A7500 None
1 2 LSQ1TGX4SD Normal 0 A7500 None
1 3 LSQ1TGX4SD Normal 0 A7500 None
1 4 LSQ1TGX4SD Normal 0 A7500 None
2 0 LSQ1SRP1CB Slave 0 A7500 None