HP 7500 Switch Series - HP A7500-CMW520-R6626P02 Release Notes

HP A7500-CMW520-R6626P02 Release Notes
Hewlett-Packard Development Company, L.P.
30
 Install patches
1. Upgrade Boot ROM
# Upgrade the Boot ROM program of the active MPU of the IRF fabric.
<Sysname> bootrom update file flash:/newest.app chassis 1 slot 0
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 0.
# Upgrade the Boot ROM program of each standby MPU of the IRF fabric.
 On the standby MPU in slot 1 of member device 1
<Sysname> bootrom update file chassis1#slot1#flash:/newest.app chassis 1 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 1.
 On the standby MPU in slot 0 of member device 2
<Sysname> bootrom update file chassis2#slot0#flash:/newest.app chassis 2 slot 0
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 0.
 On the standby MPU in slot 1 of member device 2
<Sysname> bootrom update file chassis2#slot1#flash:/newest.app chassis 2 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 1.
# Reboot theIRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
NOTE:
 You cannot upgrade the Boot ROM program of the LPUs on the member switches of an IRF fabric.
 The Boot ROM image stored on the active MPU of the IRF fabric can be used to upgrade the active MPU
and LPUs of the IRF fabric, while that stored on a standby MPU of the IRF fabric can be used to upgrade
the standby MPU only.
2. Upgrade system software
# Specify the file newest.app as the main system software image to be used at the next startup of the
active MPU of the IRF fabric.