HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes
HP A7500-CMW520-R6635 Release Notes
Hewlett-Packard Development Company, L.P.
31
Download the .app file to the IRF fabric
Download the .app file to the storage medium (such as flash memory) of the active MPU and that of each
standby MPU of the IRF fabric. Skip this section if the file is already located there.
You can download the .app file through FTP or TFTP. The following illustrates how to download through
FTP when the switch serves as the FTP client and the PC serves as the FTP server.
1. Run the FTP server program on the PC (assume its IP address is 10.10.110.1). Ensure that you
have configured the username and password, set the correct file directory, and saved the .app file
in the work directory.
2. Download the .app file (newest.app for example) to the active MPU of the IRF fabric.
# Log in to the PC through FTP.
<Sysname> ftp 10.10.110.1
Trying ...
Press CTRL+K to abort
Connected to 10.10.110.1
220 3Com 3CDaemon FTP Server Version 2.0
User(10.10.110.1:(none)):username ---Type the username.
331 User name ok, need password
Password: ---Enter the passw ord.
230 User logged in
# Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
# Download the .app file from the PC to the root directory of the storage medium on the active MPU of
the IRF fabric.
[ftp] get newest.app
227 Entering Passive Mode (10,10,110,1,17,97).
125 BINARY mode data connection already open, transfer starting for / newest.app.
226 Transfer complete.
FTP: 14323376 byte(s) received in 15.974 second(s), 896.00K byte(s)/sec.
[ftp] by e
221 Server closing.
3. Copy the file newest.app to the root directory of the storage medium on each standby MPU of the
IRF fabric.
On the standby MPU in slot 1 of member device 1
<Sysname> copy newest.app chassis1#slot1#flash:/
Copy flash:/newest.app to chassis1#slot1#flash:/newest.app?[Y/N]:y
%Copy file flash:/newest.app to chassis1#slot1#flash:/newest.app...Done.
On the standby MPU in slot 0 of member device 2
<Sysname> copy newest.app chassis2#slot0#flash:/
Copy flash:/newest.app to chassis2#slot0#flash:/newest.app?[Y/N]:y
%Copy file flash:/newest.app to chassis2#slot0#flash:/newest.app...Done.
On the standby MPU in slot 1 of member device 2