HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes
HP A7500-CMW520-R6635 Release Notes
Hewlett-Packard Development Company, L.P.
33
<Sysname> bootrom update file chassis2#slot1#flash:/newest.app chassis 2 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 1.
# Reboot the IRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
NOTE:
You cannot upgrade the Boot ROM program of the LPUs on the member switches of an IRF fabric.
The Boot ROM image stored on the active MPU of the IRF fabric can be used to upgrade the active MPU
and LPUs of the IRF fabric, while that stored on a standby MPU of the IRF fabric can be used to upgrade
the standby MPU only.
2. Upgrade system software
# Specify the file newest.app as the main system software image to be used at the next startup of the
active MPU of the IRF fabric.
<Sysname> boot-loader file newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue ? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 0!
# Specify the file newest.app as the main system software image to be used at the next startup of the
standby MPUs of the IRF fabric.
On the standby MPU in slot 1 of member device 1
<Sysname> boot-loader file chassis1#slot1#flash:/newest.app chassis 1 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 1!
On the standby MPU in slot 0 of member device 2
<Sysname> boot-loader file chassis2#slot0#flash:/newest.app chassis 2 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 0!
On the standby MPU in slot 1 of member device 2
<Sysname> boot-loader file chassis2#slot1#flash:/newest.app chassis 2 slot 1 main
This command will set the boot file of t he specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 1!
# Reboot the IRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configu ration file, please wait.