HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes
HP A7500-CMW520-R6635 Release Notes
Hewlett-Packard Development Company, L.P.
34
........DONE!
This command will reboot the device. Continue? [Y/N]:y
CAUTION:
To prevent configuration loss, save the latest configuration changes before you reboot the switch.
System software images must be saved in the root directory of the storage medium. You can copy or
move system software images to the root directory. For more information about the boot-loader
command, see
Fundamentals Command Reference
in the
HP A7500 Switch Series Command
References
.
3. Install patches
# Download the patch files to the root directory of the storage medium of the active and standby MPUs,
and then install the patch files with the patch install command.
<Sysname> system-view
[Sysname] patch install flash:
Patches will be installed. Cont inue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.
NOTE:
A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 10
shows the default names of patch files.
For more information about patch installation, see
Fundamentals
in the
HP A7500 Switch Series
Configuration Guides
.
Upgrade from the boot menu
You can upgrade the Boot ROM program and system software image for the MPUs from the boot menu.
Upgrading Boot ROM from the boot menu
Upgrading system software from the boot menu
CAUTION:
You cannot simultaneously upgrade the active and standby MPUs from the boot menu. To ensure that the
active and standby MPUs use the same software version, upgrade them in turn.
Boot menu
Connect a configuration terminal such as a PC to the console port of the switch with a console cable, run
the terminal emulation program on the PC, and power on the switch.
Upon power-on, the switch runs the Boot ROM program first and displays the following information:
Starting......
RAMLine.....OK