HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes

HP A7500-CMW520-R6635 Release Notes

Hewlett-Packard Development Company, L.P.

4: Delete file from device

5: Modify bootrom password

0: Reboot

Enter your choice(0-5):0

Step14 Type 0 to reboot the switch.

NOTE:

After the reboot, you must change the baud rate for HyperTerminal back to 9600 bps by following Step 5

and Step 6.

Using an upgrade file on the switch

Step1 Connect the console port of the switch to a PC.

Step2 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Boot menu for

more information), and press Ctrl+U when you see "Enter your choice(0-5):" to enter the Boot ROM

update menu.

BootRom update menu:

1. Set TFTP protocol parameters

2. Set FTP protocol parameters

3. Set XMODEM protocol parameters

4. Update through file in device

0. Return to boot menu

Enter your choice(0-4):

Step3 In the Boot ROM update menu, type 4. The following information appears:

Flash:/

Number. Size(B) Time Name

============================================= ==================================

1 5732 Aug/17/2010 19:20:10 private-data.txt

2 8172 Aug/17/2010 19:21:05 startup.cfg

3(*-) 27451869 Jul/29/2010 17:35:17 switch000.app

4 27455679 Jul/29/2010 17:35:17 update.app

5 151 Aug/17/2010 19:20:21 system.xml

6 429516 Aug/19/2010 15:59:51 mpu.btw

7 7938 May/10/2010 13:59:11 config.cfg

Free space: 37154816 bytes

The current application file is:flash:/ switch000.app

The backup application file is:flash:/switch000.app

Please input the file number:4

Step4 Type the number of the target .app file. The following information appears:

The file you selected is flash:/ update.app, update from it? Yes or No(Y/N)Y