HP FlexFabric 11900 Switch Series - HP 11900-CMW710-R2105P05 Release Notes

# Specify the images as the main startup software images for the global active MPU.
<Sysname> boot-loader file boot flash:/11908-CMW710-BOOT-E2102.bin system
flash:/11908-CMW710-SYSTEM-E2102.bin chassis 1 slot 4 main
The images that have passed all examinations will be used as the main startup software
images at the next reboot on chassis 1 slot 4..
# Specify the images as the main startup software images for the standby MPUs:
 On the standby MPU in slot 5 of member device 1:
<Sysname> boot-loader file boot flash:/11908-CMW710-BOOT-E2102.bin system
flash:/11908-CMW710-SYSTEM-E2102.bin chassis 1 slot 5 main
This command will set the main startup software images. Continue? [Y/N]:y
Successfully copied flash:/ 11908-CMW710-BOOT-E2102.bin to chassis1#slot5#flash:
/ 11908-CMW710-BOOT-E2102.bin.
Successfully copied flash:/ 11908-CMW710-SYSTEM-E2102.bin to chassis1#slot5#flas
h:/ 11908-CMW710-SYSTEM-E2102.bin.
The images that have passed all examinations will be used as the main startup
software images at the next reboot on chassis 1 slot 5.
 On the standby MPU in slot 4 of member device 2:
<Sysname> boot-loader file boot flash:/11908-CMW710-BOOT-E2102.bin system
flash:/11908-CMW710-SYSTEM-E2102.bin chassis 2 slot 4 main
This command will set the main startup software images. Continue? [Y/N]:y
Successfully copied flash:/ 11908-CMW710-BOOT-E2102.bin to chassis1#slot5#flash:
/ 11908-CMW710-BOOT-E2102.bin.
Successfully copied flash:/ 11908-CMW710-SYSTEM-E2102.bin to chassis1#slot5#flas
h:/ 11908-CMW710-SYSTEM-E2102.bin.
The images that have passed all examinations will be used as the main startup
software images at the next reboot on chassis 2 slot 4.
 On the standby MPU in slot 5 of member device 2:
<Sysname> boot-loader file boot flash:/11908-CMW710-BOOT-E2102.bin system
flash:/11908-CMW710-SYSTEM-E2102.bin chassis 2 slot 5 main
This command will set the main startup software images. Continue? [Y/N]:y
Successfully copied flash:/ 11908-CMW710-BOOT-E2102.bin to chassis1#slot5#flash:
/ 11908-CMW710-BOOT-E2102.bin.
Successfully copied flash:/ 11908-CMW710-SYSTEM-E2102.bin to
chassis1#slot5#flash:/ 11908-CMW710-SYSTEM-E2102.bin.
The images that have passed all examinations will be used as the main startup
software images at the next reboot on chassis 2 slot 5.
For more information about the boot-loader command, see HP 11900 Switch Series Fundamentals
Command Reference.
# To prevent configuration loss at reboot, save the running configuration.
<Sysname> save
# Reboot the IRF fabric to complete the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
3. Install a patch package
# Uninstall the old patch package from all cards on the switch.
15