HP FlexFabric 11900 Switch Series - HP 11900-CMW710-R2105P05 Release Notes

Table 21 DEVICE CONTROL menu options
Option Task
<1> Display All Available Nonvolatile Storage Device(s) Display all available storage media.
<2> Set The Operating Device
Set the current storage medium. All file
operations performed using BootWare menus
are performed on the current storage medium.
<3> Set The Default Boot Device
Set the default storage medium from which the
system will start up.
<0> Exit To Main Menu Return to the EXTEND-BOOTWARE menu.
Using the EXTEND-ASSISTANT menu
In the EXTEND-BOOTWARE menu, press Ctrl+Z to access the EXTEND-ASSISTANT menu.
==========================<EXTEND-ASSISTANT MENU>===========================
|<1> Display Memory |
|<2> Search Memory |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-2):
Formatting the file system
CAUTION:
Formatting the file system of a storage medium can cause the loss of all files.
To format the file system of the current storage medium:
1. Press Ctrl + F while you are in the EXTEND-BOOTWARE menu.
2. Enter Y when the prompt for confirmation appears.
Warning:All files on flash will be lost! Are you sure to format? [Y/N]y
Handling upgrade failures
If an upgrade failure occurs, the switch operates using the original version.
To handle upgrade failure:
3. Check that physical ports are correctly connected.
4. Check that the HyperTerminal settings are correct.
5. Check the HyperTerminal output for errors. The following shows some possible errors.
• You have selected a baud rate other than 9600 bps, but did not set to the corresponding baud rate
on HyperTerminal.
• You typed an incorrect TFTP server IP address, filename, or directory.
• You typed an incorrect FTP server IP address, filename, file directory, FTP username, or password.
6. Verify that FTP or TFTP server software is running and has correct settings.
53