HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

5 NONE Absent 0 NONE None

6 NONE Absent 0 NONE None

7 NONE Absent 0 NONE None

8 NONE Absent 0 NONE None

9 LSX1TGS48FC1 Normal 0 12900-1106 None

10 LSX1FAB10B1 Normal 0 12900-1106 None

11 LSX1FAB10B1 Normal 0 12900-1106 None

12 NONE Absent 0 NONE None

13 NONE Absent 0 NONE None

14 NONE Absent 0 NONE None

15 NONE Absent 0 NONE None

16 LSX1SUP10A1 Standby 0 12900-1106 None

17 LSX1SUP10A1 Master 0 12900-1106 None

The output shows that the switch has two MPUs, an active MPU in slot 17 and a standby MPU in

slot 16. You must upgrade software for the two MPUs.

NOTE:

You only need to upgrade the active MPU if the device has no standby MPU.

3. Verify that the MPUs have enough free storage space for the upgrade files:

# On the active MPU:

<Sysname> dir

Directory of flash:

0 drw- - Aug 06 2013 17:26:38 diagfile

1 -rw- 42 Aug 07 2013 08:55:30 ifindex.dat

2 drw- - Aug 06 2013 17:26:38 license

3 drw- - Aug 06 2013 18:26:41 logfile

4 -rw- 102294528 Apr 07 2013 13:47:21 12900-CMW710-R1106.ipe

5 -rw- 14908416 Aug 06 2013 17:21:31 12900-cmw710-boot-r1106.bin

6 -rw- 110083072 Aug 06 2013 17:23:20 12900-cmw710-system-r1106.bin

7 drw- - Aug 06 2013 17:26:38 seclog

8 -rw- 1982 Aug 07 2013 08:55:30 startup.cfg

9 -rw- 33368 Aug 07 2013 08:55:31 startup.mdb

10 drw- - Aug 06 2013 17:26:40 versionInfo

1028096 KB total (487680 KB free)

# On the standby MPU:

<Sysname> dir slot16#flash:

Directory of slot16#flash: