HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

17
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4):
7. Enter 2 or 3 as needed. For example, to upgrade the main Comware software images, enter 2.
Loading.....................................................................
............................................................................
.........................Done!
31911744 bytes downloaded!
Image file BOOT.bin is self-decompressing... Saving file flash:/
BOOT.bin ..............................................Done.
Image file SYSTEM.bin is self-decompressing...Saving file flash:/
SYSTEM.bin .................................. ..Done.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4):
8. Enter 0 in the Ethernet submenu to return to the EXTENDED-BOOTWARE menu.
9. Enter 1 in the EXTENDED-BOOTWARE menu to run the new Comware software.
Using FTP to upgrade through the management Ethernet port
1. Connect the management Ethernet port of the switch to the PC that stores the source .ipe file, and
connect the console port of the switch to the configuration terminal. The configuration terminal can
be co-located with the TFTP server.
2. Run the FTP server program on the PC connected to the management Ethernet port, specify the file
storage directory, and set the username and password.
3. Run the terminal emulation program on the PC connected to the console port.
4. Start the switch and access the EXTENDED-BOOTWARE menu (for more information, see "Using
BootWare menus").
5. Enter 3 in the EXTENDED-BOOTWARE menu to access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |