HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

18
============================================================================
Enter your choice(0-4):
6. Enter 4 to set Ethernet port parameters.
NOTE:
To use the default settings, press Enter without modifying the settings.
======================<ETHERNET PARAMETER SET>==============================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):ftp
Load File Name :test.bin
:newest.ipe
Target File Name :test.bin
:newest.ipe
Server IP Address :192.168.80.20
Local IP Address :192.168.80.10
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :UserN
FTP User Password :PWD
Table 10 Setting FTP file transfer parameters
Field
Description
'.' = Clear field
Press the dot (.), and then press Enter to clear the setting for a field.
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the previous
field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on
the device. The target file name must have the same suffix as the
source file.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP server. If a mask must be set, use a
colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Local IP Address
Set the IP address of the device.
Subnet Mask
Set the IP subnet mask of the device.
Gateway IP Address
Set a gateway IP address if the device is on a different network
than the server.
FTP User Name
Set the username for accessing the FTP server. This username must
be the same as the one configured on the FTP server.