HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

25
7. Enter 4 to set file transfer parameters. For field descriptions, see Table 9 .
NOTE:
To use the default settings, press Enter without modifying the settings.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):tftp
Load File Name :test.btw
:mpu.btw
Target File Name :test.btw
:mpu.btw
Server IP Address :192.168.80.22
Local IP Address :192.168.80.10
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
After you finish setting TFTP parameters, the system returns to the BOOTWARE OPERATION
ETHERNET submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extended BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
8. Enter a number from 1 to 3 as needed. For example, to upgrade the entire BootWare, enter 1.
Loading...........Done!
447612 bytes downloaded!
Updating Basic BootWare? [Y/N]
9. Enter Y to upgrade the basic BootWare.
Updating Basic BootWare.........Done!
Updating Extended BootWare? [Y/N]
10. Enter Y to upgrade the extended BootWare.
Updating Extended BootWare.........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extended BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):