Manualshelf

HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
31323334353637383940
26
11. Enter 0 in the BOOTWARE OPERATION ETHERNET submenu to return to the BootWare Operation
menu.
12. Enter 0 in the BootWare Operation menu to return to the EXTENDED-BOOTWARE menu.
13. Enter 0 in the EXTENDED-BOOTWARE menu to reboot the switch.
Using FTP to upgrade through the management Ethernet port
1. Connect the management Ethernet port of the switch to the PC that stores the source .ipe BootWare
image, and connect the console port of the switch to the configuration terminal.
The configuration terminal can be co-located with the FTP server.
2. Run the FTP server program on the PC connected to the management Ethernet port, specify the file
storage directory, and set the username and password.
3. Run the terminal emulation program on the PC connected to the console port.
4. Start the switch and access the EXTENDED-BOOTWARE menu (see "Using BootWare menus").
5. Enter 7 in the EXTENDED-BOOTWARE menu to access the BootWare Operation menu.
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
6. Enter 4 to access the BOOTWARE OPERATION ETHERNET submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extended BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
7. Enter 4 to set file transfer parameters. For field descriptions, see Table 10 .
NOTE:
To use the default settings, press Enter without modifying the settings.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):ftp
Load File Name :test.btw
:mpu.btw