HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

36
NOTE:
The baud rate change is a one-time operation. The baud rate will restore to the default (9600 bps) at
reboot. To set up a console session with the device after a reboot, you must change the baud rate
setting on the configuration terminal back to 9600 bps.
Updating the extended BootWare segment
If the extended BootWare segment is corrupted, enter 2 in the BASIC-BOOTWARE menu to update it.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Updating the entire BootWare
To update the entire BootWare, enter 3 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 3
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Running the primary extended BootWare segment
To bootstrap the Comware images with the primary extended BootWare segment, enter 4 in the
BASIC-BOOTWARE menu.
Enter your choice(0-5): 4
Booting Normal Extended BootWare....
The Extended BootWare is self-decompressing.........Done.
****************************************************************************
* *
* BootWare, Version 1.19 *
* *
****************************************************************************
Compiled Date : Mar 19 2013
CPU Type : XLP316
CPU Clock Speed : 1200MHz
Memory Type : DDR3 SDRAM
Memory Size : 8192MB
Memory Speed : 667MHz
BootWare Size : 1536KB
Flash Size : 500MB
BASIC CPLD Version : 3.0
EXTENDED CPLD Version: 3.0
PCB Version : Ver.A
BootWare Validating...